Food Packaging

Uses: Convenience meals, takeaway meals, bakery products. Material: Recycled and/or new grade aluminium foil. Temp Range: Can be frozen and re-heated in oven. Not able to be microwaved. Shape Retention: Average. Grease & oil resistance: Ideal resistance to fats, oils and sugars. Heat & moisture loss: minimal. Safety: Ideal long shelf product, surface precludes oxidation. Fully resistant to all chemicals. Lidding Options: Cardboard lids are available with foil backing on some sizes. Environmental: Made from recycled foil and is able to be re-recycled at any collection depot in NZ.

Our bioplastic bowls are made from plants not oil and are commercially compostable. Cold use only.

Brim full capacity: 1090ml
Diameter top: 173x173mm
Product size: 173mm L x 173mm W x 80mm H
Carton size: 59.5cm L x 54cm W x 20.5cm H
Pieces per carton: 450 (Pieces per sleeve: 50)

- BioPak clear bowls may look and perform like any other plastic bowls, but ours are made from Ingeo', a plant based bioplastic.
- Producing these bowls results in 75% less greenhouse gases than the conventional plastic it replaces.
- These food bowls are the ONLY clear bioplastic bowls certified commerically compostable to Australian AS4736 standards. - This is in addition to our Eurpoean EN13432 standards.
- They perform excellently when serving cold meals ' perfect for a fruit salad or yogurt with muesli!
- Bioplastic does not have suitable oxygen barrier properties to store food for more than a few days.
- Bioplastics must be stored out of direct sun and below 35'C. If stored correctly, they have an indefinite shelf life.

Our PET clear lids are leak proof and suitable for cold food only. They are not suitable for the microwave or oven.

Diameter top: 188mm
Product size: 20mm H
Carton size: 40cm L x 29cm W x 39cm H
Carton total weight: 3.4kg
Pieces per carton: 200 (Pieces per sleeve: 50)

- BioBowl paper is sourced from managed plantations and coated with Ingeo' ' a bioplastic made from plants, not oil.
- Producing our bioplastic cup lining results in 75% less greenhouse gases than the conventional plastic it replaces.
- We use a heavy-duty, premium quality board giving our bowls superior stability, better lid fit and insulation.
- They are suitable for both hot and cold foods and are soup-safe ' an environmentally friendly alternative to conventional soups bowls or ice cream bowls.
- Printed using eco-friendly soy-based or water-based inks.
- These bowls and bioplastic lid options have a 12-month shelf life.

Paper BioBowls are sustainably sourced from FSC' certified forests and other controlled sources. They are lined with a bioplastic made from plants, not oil. This bowl is printed kraft-look.

Brim full capacity: 1010ml
Diameter top: 148x148mm
Product size: 148mm L x 148mm W x 79mm H
Carton size: 61cm L x 31cm W x 51cm H
Carton total weight: 8.1kg
Pieces per carton: 400 (Pieces per sleeve: 50)

- BioBowl paper is sourced from managed plantations and coated with Ingeo' ' a bioplastic made from plants, not oil.
- Producing our bioplastic cup lining results in 75% less greenhouse gases than the conventional plastic it replaces.
- We use a heavy-duty, premium quality board giving our bowls superior stability, better lid fit and insulation.
- They are suitable for both hot and cold foods and are soup-safe ' an environmentally friendly alternative to conventional soups bowls or ice cream bowls.
- Printed using eco-friendly soy-based or water-based inks.
- These bowls and bioplastic lid options have a 12-month shelf life.
- These bowls are compostable in a commercial facility and recyclable in most kerb-side recycling, like milk cartons.
- This range includes some sizes that have a printed kraft-look ' learn why we print kraft-look across some of our range.

Made from sustainable sourced and FSC certified Birchwood, a great alternative to disposable plastic cutlery.
Product size: 100mm L
Pieces per carton: 2,000
Pieces per sleeve: 50
Carton size: 34.5cm L x 16.5cm W x 14cm H
Carton total weight: 2.8kg

BioStraws are made from 3 ply premium grade FSC' (Forest Stewardship Council) certified paper sourced from managed plantations.

Diameter top: 10x10mm
Product size: 10mm L x 10mm W x 197mm H
Thickness: 3mm
Carton size: 51.3cm L x 51.3cm W x 21.5cm H
Carton total weight: 6kg
Pieces per carton: 2,500 (Pieces per sleeve: 100)

- BioStraws are made from 3 ply premium grade FSC'
certified paper sourced from managed plantations. FSC' forest management certification confirms that the forest is being managed in a way that preserves the natural ecosystem and benefits the lives of local people and workers, all while ensuring it remains economically viable.
- These straws are carbon neutral, commercially and home compostable.
- Our beautifully designed paper straws come in various shapes and colours. They are eco-friendly, stylish, functional and come in various sizes to suit any drink ' the perfect choice for your smoothie or cocktail!
- Our BioStraw range has an indefinite shelf-life, if kept cool and dry.

BioPak Hot Cups are produced from 280GSM heavy-duty board for a premium quality product with superior stability, lid fit and insulation and printed using soy or water based inks. All the paper is sourced responsibly from managed plantations and coated with Ingeo™, an innovative corn-based bioplastic rather than conventional petroleum-based plastic. All components of BioPak cups are made from rapidly renewable resources and are certified carbon neutral.

-Renewable resources
-PLA bioplastic
-Paper from managed plantations
-Hot food friendly (Do not microwave)
-Custom printing
-Commercial composting
-BPA free
-Certified carbon neutral

Carton 1000

Single wall.

80mm cup mouth - fits small lids

See lid options below.

Paper BioCups are sustainably sourced from managed plantations with a bioplastic lining made from plants not oil.

Specifications
Brim full capacity: 338ml (10oz)
Diameter top: 80mm
Product dimensions: 110mm
Paper weight: 315gsm
Pieces per carton: 1000
Pieces per sleeve: 50
Carton dimensions: 41 x 33 x 53cm
Carton total weight: 10.2kg

BioPak Hot Cups are produced from 280GSM heavy-duty board for a premium quality product with superior stability, lid fit and insulation and printed using soy or water based inks. All the paper is sourced responsibly from managed plantations and coated with Ingeo™, an innovative corn-based bioplastic rather than conventional petroleum-based plastic. All components of BioPak cups are made from rapidly renewable resources and are certified carbon neutral.

-Renewable resources
-PLA bioplastic
-Paper from managed plantations
-Hot food friendly (Do not microwave)
-Custom printing
-Commercial composting
-BPA free
-Certified carbon neutral

Carton 1000

Single wall.

80mm cup mouth - fits small lids

See lid options below.

Made with clear PLA, these cups look and feel like a combination of PET and PP materials, but they are compostable. This means they feel strong, while providing clear visual product representation, and they do not contain petroleum-based plastic. The wall and base mold design creates excellent grip, side wall strength and base stability.�

Size: 110H x 95DIA 400ml capacity to brim

Lids separate

BioPak Hot Cups are produced from 280GSM heavy-duty board for a premium quality product with superior stability, lid fit and insulation and printed using soy or water based inks. All the paper is sourced responsibly from managed plantations and coated with Ingeo™, an innovative corn-based bioplastic rather than conventional petroleum-based plastic. All components of BioPak cups are made from rapidly renewable resources and are certified carbon neutral.

-Renewable resources
-PLA bioplastic
-Paper from managed plantations
-Hot food friendly (Do not microwave)
-Custom printing
-Commercial composting
-BPA free
-Certified carbon neutral

Carton 1000

Double Wall.

90mm cup mouth - fits large lids.

See lid options below.

BioPak Hot Cups are produced from 280GSM heavy-duty board for a premium quality product with superior stability, lid fit and insulation and printed using soy or water based inks. All the paper is sourced responsibly from managed plantations and coated with Ingeo™, an innovative corn-based bioplastic rather than conventional petroleum-based plastic. All components of BioPak cups are made from rapidly renewable resources and are certified carbon neutral.

-Renewable resources
-PLA bioplastic
-Paper from managed plantations
-Hot food friendly (Do not microwave)
-Custom printing
-Commercial composting
-BPA free
-Certified carbon neutral

Carton 1000

Double Wall.

90mm cup mouth - fits large lids.

See lid options below.

BioPak Hot Cups are produced from 280GSM heavy-duty board for a premium quality product with superior stability, lid fit and insulation and printed using soy or water based inks. All the paper is sourced responsibly from managed plantations and coated with Ingeo™, an innovative corn-based bioplastic rather than conventional petroleum-based plastic. All components of BioPak cups are made from rapidly renewable resources and are certified carbon neutral.

-Renewable resources
-PLA bioplastic
-Paper from managed plantations
-Hot food friendly (Do not microwave)
-Custom printing
-Commercial composting
-BPA free
-Certified carbon neutral

Carton 1000

Double Wall.

90mm cup mouth - fits large lids.

See lid options below.

IMAGE AS A GUIDE ONLY. Cartons contain up to three different art cups with new artists featured every two months. Pictured here are designs from the latest Art Series. Unfortunately, we cannot sell individual art cups and cannot guarantee which prints, or which series of prints will be in each carton.

Specifications
Brim full capacity: 360ml (12oz)
Diameter top: 80mm
Product dimensions: 120mm
Paper weight: 320gsm
Pieces per carton: 1000
Pieces per sleeve: 50
Carton dimensions: 42 x 34.5 x 54cm
Carton total weight: 10.6kg

BioPak Hot Cups are produced from 280GSM heavy-duty board for a premium quality product with superior stability, lid fit and insulation and printed using soy or water based inks. All the paper is sourced responsibly from managed plantations and coated with Ingeo™, an innovative corn-based bioplastic rather than conventional petroleum-based plastic. All components of BioPak cups are made from rapidly renewable resources and are certified carbon neutral.

-Renewable resources
-PLA bioplastic
-Paper from managed plantations
-Hot food friendly (Do not microwave)
-Custom printing
-Commercial composting
-BPA free
-Certified carbon neutral

Carton 1000

Single wall.

90mm cup mouth - fits large lids.

Carton holds mixed cup designs. Cups designs change.
PLEASE NOTE: We are unable to guarantee which prints will be in each carton. Sometimes there may be only one and other times you may get an even split of two or three artworks.

See lid options below.

BioPak Hot Cups are produced from 280GSM heavy-duty board for a premium quality product with superior stability, lid fit and insulation and printed using soy or water based inks. All the paper is sourced responsibly from managed plantations and coated with Ingeo™, an innovative corn-based bioplastic rather than conventional petroleum-based plastic. All components of BioPak cups are made from rapidly renewable resources and are certified carbon neutral.

-Renewable resources
-PLA bioplastic
-Paper from managed plantations
-Hot food friendly (Do not microwave)
-Custom printing
-Commercial composting
-BPA free
-Certified carbon neutral

Carton 1000

Single wall.

80mm cup mouth - fits small lids

See lid options below.

BioPak Hot Cups are produced from 280GSM heavy-duty board for a premium quality product with superior stability, lid fit and insulation and printed using soy or water based inks. All the paper is sourced responsibly from managed plantations and coated with Ingeo™, an innovative corn-based bioplastic rather than conventional petroleum-based plastic. All components of BioPak cups are made from rapidly renewable resources and are certified carbon neutral.

-Renewable resources
-PLA bioplastic
-Paper from managed plantations
-Hot food friendly (Do not microwave)
-Custom printing
-Commercial composting
-BPA free
-Certified carbon neutral

Carton 1000

Single wall.

90mm cup mouth - fits large lids

See lid options below.

BioPak Hot Cups are produced from 280GSM heavy-duty board for a premium quality product with superior stability, lid fit and insulation and printed using soy or water based inks. All the paper is sourced responsibly from managed plantations and coated with Ingeo™, an innovative corn-based bioplastic rather than conventional petroleum-based plastic. All components of BioPak cups are made from rapidly renewable resources and are certified carbon neutral.

-Renewable resources
-PLA bioplastic
-Paper from managed plantations
-Hot food friendly (Do not microwave)
-Custom printing
-Commercial composting
-BPA free
-Certified carbon neutral

Carton 1000

Single wall.

90mm cup mouth - fits large lids

See lid options below.

Specifications
Brim full capacity: 360ml (12oz)
Diameter top: 80mm
Product dimensions: 120mm
Paper weight: 315gsm
Pieces per carton: 1000
Pieces per sleeve: 50
Carton dimensions: 42 x 34.5 x 54cm
Carton total weight: 10.6kg

-Renewable resources
-PLA bioplastic
-Paper from managed plantations
-Hot food friendly (Do not microwave)
-Custom printing
-Commercial composting
-BPA free
-Certified carbon neutral

BioPak Hot Cups are produced from 280GSM heavy-duty board for a premium quality product with superior stability, lid fit and insulation and printed using soy or water based inks. All the paper is sourced responsibly from managed plantations and coated with Ingeo™, an innovative corn-based bioplastic rather than conventional petroleum-based plastic. All components of BioPak cups are made from rapidly renewable resources and are certified carbon neutral.

-Renewable resources
-PLA bioplastic
-Paper from managed plantations
-Hot food friendly (Do not microwave)
-Custom printing
-Commercial composting
-BPA free
-Certified carbon neutral

Carton 1000

Single wall.

90mm cup mouth - fits large lids

See lid options below.

BioPak Hot Cups are produced from 280GSM heavy-duty board for a premium quality product with superior stability, lid fit and insulation and printed using soy or water based inks. All the paper is sourced responsibly from managed plantations and coated with Ingeo™, an innovative corn-based bioplastic rather than conventional petroleum-based plastic. All components of BioPak cups are made from rapidly renewable resources and are certified carbon neutral.

-Renewable resources
-PLA bioplastic
-Paper from managed plantations
-Hot food friendly (Do not microwave)
-Custom printing
-Commercial composting
-BPA free
-Certified carbon neutral

Carton 1000

Single wall.

80mm cup mouth - fits small lids

See lid options below.

Diameter top: 80x80mm
Product size: 80mm L x 80mm W x 59mm H
Carton size: 24cm L x 41.5cm W x 58cm H
Carton total weight: 5.2kg
Pieces per carton: 1,000 (pieces per sleeve: 100)